Anode Baking Furnace Tending Assembly
The baking furnace tending assembly is a special equipment in anode baking workshop. Its main process operations:
1. Use clamps to transport the anode blocks back and forth between the grouping/ungrouping.
2. Use the clamps to load the anode blocks into/out of the baking furnace pit.
3. Use the discharge pipe to fill the packing coke into the baking furnace pit.
4. Use the suction pipe to suck out the high-temperature packing coke from the baking furnace pit.
5. There is an electric lift under the bridge to assist in lifting.
The entire machine adopts PLC control, frequency conversion speed regulation and other configurations. It has been widely used in major carbon factories in China and has reached international standards. It has greatly improved the harsh working environment and reduced the labor intensity of workers.
Structure |
Subitem name |
Unit |
Parameter |
Whole cart |
Total weight |
t |
180-220 |
Working level |
|
A6-A8 |
|
Total installed power |
kw |
220-340 |
|
Large trolley |
Working speed |
m/min |
5-50 |
Speed control method |
|
Frequency conversion |
|
Working level |
|
M6-M8 |
|
Span |
m |
22.5-36 |
|
Small trolley |
Working speed |
m/min |
3-30 |
Speed control method |
|
Frequency conversion |
|
Working level |
|
M6-M8 |
|
Winch mechanism |
Lifting speed |
m/min |
2-8 |
Speed control method |
|
Frequency conversion |
|
Working level |
|
M6-M8 |
|
Single clamp lifting capacity (excluding clamp) |
t |
6-10 |
|
Clamp lifting stroke |
m |
7-9 |
|
Suction and discharge system |
Lifting speed of suction and discharge pipes |
m/min |
1.6-16 |
Lifting stroke of suction and discharge pipes |
m |
6-10 |
|
Silo |
Silo volume |
m³ |
10-60 |
Suction and discharge speed |
m³/h |
30-100/65-100 |
|
Cooler |
Outlet temperature |
℃ |
≤80 |
Heat dissipation area |
m³ |
200-600 |
|
Processing temperature |
℃ |
240-600 |
|
Dust removal |
Filter area |
m³ |
60-200 |
Filter effects |
mg/m |
≤15 |
|
Centrifugal fan |
Power |
kw |
90-200 |
Air volume |
m³/min |
90-220 |
|
Vacuum degree |
KPa |
-35 |
|
Compressor |
Pressure |
MPa |
0.8 |
Electric hoist |
Lifting volume |
t |
5-10 |
Lifting speed |
m/min |
7-8 |
|
Working speed |
m/min |
20 |
|
Note: The above technical parameters are for reference |